S-200-24 200W 24VDC 8.5A Single Group Switching Power Supply AC 110V / 220V to DC 24V

S-200 series 200W general switching power supplyfinglaiModel number and parametersModel numberS-200-5S-200-12S-200-15S-200-24S-200-48Related productOrderOrderOrderVisiting...OrderDC output voltage5V12V15V24V48VOutput voltage error (Notes: 2)±2%±1%±1%±1%±1%Rated output current40A16.5A13.3A8.5A4.2AOutput current rage0-40A0-16.5A0-13.3A0-8.5A0-4.2AWave and noise (Notes: 3)75mVp-p75mVp-p75mVp-p75mVp-p75mVp-pInlets tability (Notes: 4)±0.5%±0.5%±0.5%±0.5%±0.5%Load stability (Notes: 5)±0.5%±0.5%±0.5%±0.5%±0.5%DC output power200W198W200W200W200WEffciency80%84%84%85%86%Adjustable range for DC voltage4.74-5.5V10.8-13.2V13.5-16.5V21.6-26.4V43-53VfinglaiGeneralModel numberS-200 seriesAC input voltage range90-132VAC/180-264VAC, selected by switch, 47-63Hz; 248-370VDCInput current3.2A/115V, 1.6A/230VAC inrush currentCold-start current: 25A/115V, 50A/230VLeakage current3.5mA/240VAC maxOverload proctection105%-150% Type:Foldback current limiting Rest:auto-recoveryOver-voltage protection115%-135% Type:hiccup mode Rest:auto-recoveryTemperature coefficient±0.03%/°C (0-50°C)Setup rise hold up time200ms, 100ms, 20msVibration10-500HZ,2G 10min/1cycle, Periodfor 60min, Each axesDielectric strength1.5KVac, 50/60 Hz for 1 min between input and output 1.5KVac, 50/60 Hz for 1 min between input and enclosure 0.5KVac, 50/60 Hz for 1 min between output and enclosureIsolation resistance100MΩ min. at 500 VDCWorking temperature humidity-10°C-60°C (Refer to output characteristic figure), 20%-90%RHStore temperature humidity-20°C-85°C, 10%-95%RHExternal dimension199x110x50 mmWeight0.9kgSafety standardsrefer to UL1012 (not apply to mark)EMC standardsFCC part 15J condition level ANote1.5KVac, 50/60 Hz for 1 min between input and output 1.5KVac, 50/60 Hz for 1 min between input and enclosur